Glow in the Dark Costumes and Fabric

Glow in the Dark Costumes
 
Anatomical Body cast
Submitted by: Justin Moore-Anatomical Light

Materials Required:
prototype arm,silicone, xylene paint, glow powder, asorted brushes

Procedure:
Here are the photographs of a prototype arm I have prepared for your viewing. This is a life casting (glow in the dark costume/glow costumes) from my arm that represents what the entire suit will look like.

The suit that I am creating is constructed of a lycra spandex material. The glo powder is mixed within a silicone / xylene based paint that will cover the stretch suit.

As mentioned earlier, the application from the prototype arm, using a clear coat polyurethane, will be much different from the soft application of the silicone on the lycra suit.

Through using the material I have learned the various time and saturation levels for light, along with the specific need for application on the lycra/spandex (while retaining a vibrant glow.)

The red on the arm that forms the veins is a mixture of red and orange. I found that once the red has dissipated the orange still glows well, and that it conforms a little to the red as well.

The bone work was a mixture of orange, green, and violet wile the arteries were mixed with violet and blue. I would like to add some of your yellow and yellow pink to the background of the suit so that it may have a warmer appearance and color diversity.

The Aqua was used with green to create the pressure points and lines. I would like to mix some of the white powder in with that as well.

 

Ready Set Glo's Comments:
If you have done any projects or have ideas that make effective use of glow products ( Luminous paints, Luminous powders, Luminous gels, Luminous stickers or Luminous Master Pellets ), please do not hesitate to write in to us at: projects@readysetglo.com .

We accept any project or easily implementable ideas that uses glow paints, glow powder, glow gel or Glow Master Pellets